Celcon Block Coursing Units

Coursing Units are produced from the same material as all H+H aircrete and are suitable for the same applications as conventional size Celcon Blocks, allowing consistency within the building fabric.

Benefits

Coursing Units are produced from the same material as all H+H aircrete and are suitable for the same applications as conventional size Celcon Blocks, allowing consistency within the building fabric.

Coursing Units have a face size of 215mm x 65mm and are available in Standard Grade (3.6N/mm2), High Strength Grade (7.3N/mm2) and Super Strength Grade (8.7N/mm2).

They are suitable for use both externally and internally in load bearing and non-load bearing situations. Use Celcon Block Coursing Units for the following applications):

Specifications

Celcon Coursing Units Standard Grade High Strength Grade Super Strength Grade
Compressive Strength 3/6N/mm2 7.3/mm2 8.7N/mm3

 

applications

They are suitable for use both externally and internally in load bearing and non-load bearing situations. Use Celcon Block Coursing Units for the following applications:

  • Infill above doors and windows
  • Coursing at floor and ceiling level
  • Making up between joists
  • Loadbearing walls

Coursing units should not be used as the only masonry unit for loadbearing walls

 

Recently Viewed Products