This website is intended to provide as much information as possible to our customers.

We are unable to provide exhaustive information on our blocks, technical details or transport and over time details may change. 

Queries should be directed to your stockist or obtained from our technical department prior to purchase. 

H+H aircrete products offer a complete building material that meets the requirements of the Building Regulations. Aircrete is a strong, lightweight masonry material with excellent thermal performance. All Celcon Blocks are resistant to fire and are BBA Certified.


H+H aircrete blocks are available in a variety of different sizes, compressive strengths and thermal conductivity properties, offering flexible solutions for private and social housing, hospitals, schools, offices and industrial warehouses.
 

Products

Standard Grade Block sample
Celcon Blocks

Celcon Blocks in Solar, Standard, High Strength and Super Strength grades are the most commonly used aircrete block in the H+H range
Solar Grade Block sample
Solar Grade Blocks

Thermal blocks offering superior thermal conductivity of 0.11 W/mK, used principally for projects where enhanced thermal performance is required
Standard Grade Block sample
Standard Grade Blocks

Standard Grade Blocks are extremely versatile aircrete blocks that can be used throughout the whole build, in all walls and floors including below DPC
Foundation Block sample
Foundation Blocks

Commonly produced in a range of thicknesses for use below ground level, these blocks support cavity or solid walls, framed construction or suspended floors
Plus Block sample
Plus Blocks

These aircrete blocks are 630mm long, offering a longer alternative to Celcon Block 440 x 215mm and suitable for similar applications
Jumbo Block sample
Jumbo Bloks

These very large blocks can be used with thin layer construction to enhance the speed of build on site
Coursing Unit sample
Coursing Units

Produced from the same aircrete material and suitable for the same applications as conventional sized Celcon Blocks
Celcon Vertical Wall Panel
Celcon Vertical Wall Panel

Storey-high aircrete panels representing a new generation of MMC wall products for a fast, quality build with little waste
High Strength Grade Block sample
High Strength Grade Blocks

Used where aircrete blocks are preferred but higher compressive strengths are required than can be achieved with Standard Grade Blocks
Super Strength Grade Block sample
Super Strength Grade Blocks

Ideal where higher compressive strengths are required, these aircrete blocks can be used in three and four storey buildings amongst other applications
Celfix thin layer mortar with scoop
Celfix Mortar

With an initial bond time of around 15 minutes and structurally loaded within 1-2 hours - for use as part of a thin-joint system